• Car Air Bags, Truck Air Bag Repairs Melbourne, Auto Electrician Mitcham Melbourne

  • At All Trans Auto Electrical Services we offer all areas of Car Air Bag services.

    Since model year 1998, all new cars have been required to have air bags fitted. We offer the best service possible at very competitive price.

    Airbag Light - Module Reset

    Why Is My Airbag Light On or Flashing? There are a number of reasons why your airbag light has come on or is flashing. This means the SRS system is inactive.  Therefore, if you get into an accident, the airbag/s will not deploy.

    Airbag Battery Backup Depleted
    If your cars battery has drained recently then the airbag battery backup can be depleted. This will often correct itself once the battery charge is fully restored. You may need a Scan-tool to remove the soft-code error.

    Airbag Clock Spring Needs Replacing
    The airbag clock springs main function is to maintain continuity with the drivers airbag and the electrical wiring. It coils in and out as the steering wheel turns. Over time the thin circuit bands my become brittle or worn and cause the drivers airbag to have an intermittent connection.

    Airbag Module Got Wet or Corroded
    A common location for the airbag module in many vehicles is underneath the driver or passenger seat. Therefore, even in light water damaged vehicles the module will short-out or corrode after being exposed to moisture. A shorted module will immediately general a DTC airbag code and your airbag light will flash a warning.

    At All Trans Auto Electrical Services we Repair and Reset Airbag Modules. During the reset process we read and clear any airbag codes present in the air bag computer. All other data is left intact. Once you have replaced the necessary SRS air bag components that activated during the accident, you can install the airbag module to clear the airbag light and the SRS system is reactivated.